top of page

Multi-Range Sanitizer Disinfectant Deodorizer | Now Approved to Use in Electrostatic Sprayers at the Disinfectant Dilution!

NSF International Certified and EPA approved broad range sanitizer delivers correct sanitizing at a range of 150-400 ppm, allowing the sanitizing solution to adapt to varying water pressure situations while maintaining compliance with health department regulations. Multi-Range Sanibet Kills 99.99% of food service organisms-Listeria, E-Coli, and Salmonella. A versatile product, it can be used to sanitize serving ware, utensils, pots & pans, and food processing equipment. It can also be used for disinfecting floors and walls. It is a complete, chemically balanced disinfectant, sanitizer that is effective even in the presence of hard water. Highly concentrated, this product provides a low end use cost per gallon. Multi-Range Sanibet has a red color indicator which provides visual confirmation of use.

Betco® Sanibet Multi-Range Sanitizer, 5g

SKU: BET2370500
$118.20Price
Excluding Sales Tax
  • General Information

    Manufacturer Betco Corporation
    Manufacturer Part Number 2370500
    Manufacturer Website Address http://www.betco.com
    Brand Name Symplicity
    Product Line Sanibet
    Product Name Sanibet Sanitizer
    Packaged Quantity 1 Each
    Product Type Surface Sanitizer

    Product Information

    Cleaner Type Concentrate
    Cleaner Form Liquid
    Cleaner Volume 640 fl oz (20 quart)
    Composition
    • Water
    • Alkyl C12-16 Dimethylbenzyl Ammonium Chloride
    • Quaternium-24
    • Didecyldimonium Chloride
    • Colorant
    Kill Claims Listeria
    Recommended Use
    • Germs Remover
    • Food Remover
    Directions/Instructions

    For School, Restaurant, Food Handling and Processing Areas, Bar and Institutional Kitchen Use. This product kills 99.99% of Foodservice Germs E. coli, Salmonella, and Listeria. This product is an effective sanitizer at 200 ppm active quat for use on food contact surfaces in 500 ppm hard water against: Campylobacter jejuni, (Community Associated) Methicillin-Resistant Staphylococcus aureus, Escherichia coli, Escherichia coli 0157:H7, Klebsiella pneumoniae, Listeria monocytogenes, Salmonella enterica, Shigella sonneii, Staphylococcus aureus, Staphylococcus aureus Methicillin-Resistant - MRSA, Yersinia enterocolitica and Vibrio cholerae.

    DIRECTIONS FOR USE
    It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

    Disinfection Directions:
    Add 3 oz. of this product per 5 gallons of water to disinfect hard, nonporous surfaces. Before use in federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected. When used on surfaces in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities, this product is an effective fungicide against Trichophyton mentagrophytes the athlete's foot fungus. Apply use-solution with a cloth, mop, sponge, sprayer or by immersion, thoroughly wetting surfaces. For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface; rub with brush, sponge or cloth. Do not breathe spray. Note: For spray applications, cover or remove all food products. Treated surfaces must remain wet for 10 minutes. Wipe dry with a clean cloth, sponge or mop or allow to air dry. Rinse food contact surfaces such as counter tops, tables, picnic tables, exteriors of appliances and / or stove tops with potable water prior to reuse. Do not use on glasses, dishes or utensils as a disinfectant. For heavily soiled areas, preclean first. Prepare a fresh solution daily or more often if the use solution becomes visibly diluted or soiled.
    For Use on Finished Floors: To limit gloss reduction use this product at 3 oz. per 5 gallons of water. Apply with a damp mop or autoscrubber.

    For use as a One-Step Cleaner and Disinfectant Against Bacteria and Viruses by Electrostatic Spraying:
    Electrostatic spray application is for efficacy claims with a 10 minute contact time and 450 ppm concentration. This application method is not to be used to treat hard, non-porous surfaces for sanitization or fungicidal claims.

    • Ensure bystanders and pets are not present in the room during application.
    • Clean visibly dirty surfaces prior to spraying.
    • Wear an N95 filtering facepiece respirator or half face respirator with a N95 filter and eye protection when spraying.
    • Select a spray nozzle that produces spray droplet particles with a volume median diameter =80µm
    • Place the electrostatic spray function in the ON position for electrostatic spray models that have the functionality to toggle ON/OFF.
    • Hold the sprayer nozzle 1-2 feet away from the target surface. Starting at the highest point and working down to the lowest point, spray target surfaces using a smooth methodical "S" pattern. To avoid leaving gaps in sprayed surfaces, overlap previously treated surfaces when moving onto subsequent sections.
    • The target surface must remain visibly wet for 10 minutes. Re-apply product as necessary to keep surface visibly wet for the duration of the contact time. Wipe surfaces dry or allow to air dry.
    • Allow the treated room to remain unoccupied for 15 minutes before reentering.
    Application/Usage Multipurpose
    Features
    • Fragrance-free
    • Disinfectant
    • Deodorize
    • Rinse-free
    • Versatile

    Physical Characteristics

    Color Family Pink
    Product Color Pink

    Miscellaneous

    Environmentally Friendly Yes

Related Products