Sport Kote® PC - Water-Based Urethane Gym Finish

• No sanding or screening
• Single-component – pour and apply
• Fast-drying – 60 minutes under normal conditions
• Play on it the next day
• Easily restored to like-new gloss
• Self cross-linking eliminates need for catalysts, gluing or heavy metals
• MFMA-approved and UL-classified
• VOC-compliant in all 50 states
• Finish lasts for 1 year with proper maintenance
• n-MP-free

• Type – Single-Component Water-Based Reactive Urethane/Acrylic
• Form – Opaque Liquid
• Odor – Bland
• Color – White
• Viscosity– <50 cps
• Weight per Gallon – 8.51 Lbs.
• pH – 7.0 – 8.0
• Specific Gravity – 1.025 grams/milliliter
• Flash Point – None
• Pot Life – None
• Non-Volatile Solids – 29%
• Storage Stability – Up To 1 Year, Unopened
• Coverage – Up to 1000 ft² per gallon
• Film-Forming Temp. – >50° F
• Freeze/Thaw – Passes 3 Cycles
• V.O.C. – <280 grams/liter

• PREPARE FLOOR: This finish is not designed for application to bare wood floors. Use only on previously sealed surfaces. Use only after proper training.
  SCRUB AND RECOAT: Dust mop floor and remove all chewing gum and labels. Prepare floor with Sport Prep(425SF), following the label directions.
  NOTE: Test previously coated floor in an inconspicuous area before recoating to determine compatibility with existing finish. Apply no more than 2 coats in 24 hours and a maximum of 3 coats in 48 hours. See finish application instructions below.
• APPLY FINISH: Stir gently before using. Apply at a rate of 800-1000 square feet per gallon. Use a weighted T-bar with a clean, synthetic pad. Apply thin, even coats with the grain of the wood while walking at a slow, even pace. Walking too fast may produce excessive bubbling in the finish. Allow a dry time of at least 1 hour between coats. Humid conditions require longer dry time. After the first coat has dried, apply a second coat. It may be necessary to screen the first coat if grain raising has occurred or it has dried longer than 4 hours. If so, screen the floor with a previously used 120 grit screen or maroon pad. Always vacuum and tack thoroughly after screening.
  NOTE: Check expiration date. Contact Essential for batch re-certification if expiration date is exceeded. Do not pour unused finish back into original container.
• MAINTAIN DAILY: Dust mop at least daily, or more as required, to keep floor dust and dirt free. Damp mop spills, salt residue, etc. with Sport Clean(1143SF) and a thoroughly wrung mop.
• MAINTAIN WEEKLY: If soil conditions are heavy, auto-scrub weekly with red pads and a 2 ounce per gallon dilution of Sport Clean(1143SF). Refer to the Wood Floor Care Wall Chart or Manual for further details.
  CAUTION: Do not use cleaning compounds other than Essential’s Sport Clean(1143SF) as they will reduce product performance and longevity.
• RESTORATION: Dust mop floor. Follow restoration directions for Sport Prep(425SF).

See label directions and SDS for complete usage and safety instructions.

 WARNING: Reproductive Harm – www.P65Warnings.ca.gov.